Busy Week – One side of the Memory Quilt is Completed!

Posted by Diane Duncan on July 5, 2008 in Featured Flag, Fibre Art & Quilts | 1 comment

How I cherish my morning walks! A friend and I meet around 8 am for a walkabout (so far just on nice days) and does it ever make a difference in my day. I am not by nature a morning person and I often can barely put words together when we start out but by the time we return we have walked and talked for 45 minutes to an hour and it seems like no time at all. I’ve tried to motivate myself for a daily walk for years but for me having a walking partner is essential! The other day I took my camera along and took pictures in some of the gardens along the way and then took time for some in my own. Fodder for future artwork. Here is one to illustrate what terrific inspiration can be found in our everyday world.

I have also been busy following up on some leads that have been thrown my way over the past few weeks. Thank you friend for looking out for me. As a result I now have a series of watercolours in the Virtual Art Market (V.A.M.) gallery, 77 Bridge St. in Carleton Place. It isn’t open Sundays and Mondays and opens at 11 on other days but seems to be doing a great job of marketing local artists. You can preview some of these painting by following my link to my portfolio and checking out the watercolour pages.

I have also received word that son #2 will be visiting next weekend and the t-shirt quilt that I introduced in a previous blog is for him. So, I’m making a concerted effort to get it as far ahead as possible before his arrival. Through the blog, I will document my aha’s for any of you that may want to attempt a t-shirt quilt in the future.

Then, I took each of the logos and ironed on tricot interfacing. I chose a fusible tricot knit,a very light weight interfacing, as it left the t-shirt material soft. By turning the stretch in the opposite direction to the greatest stretch in the t-shirt it provides stability and minimized stretch.

There weren’t a lot of logos that were the same width so the first task was to make them match. I framed some of them in one of the four fabrics selected for this purpose and trimmed all of them to fit the desired width. As I will say over and over, measure, measure, measure. Each time you press a seam open or even in the stitching there will be some stretch and reshaping appear in the t-shirt material even though it has been stabilized. Make sure opposite sides match exactly. I found out the hard way that this is important!

Once the chosen logos were trimmed or bordered so that they were all the same width, I started to add the framing fabric I had chosen. Thank goodness, I chose a fabric that, when joined to a piece of the same fabric, didn’t show where the joins occurred. More on that to come. I added the horizontal pieces first, creating a strip, then checked the sides of the strip for any distortion. Then I added side strips, being careful to check that the length of each logo and of the strip was the same.

Then I joined the strips to form the top. Even though I measured carefully, there were slight variations in the lengths of the strips so, I stitched them together so that one side (in this case the bottom) of the piece was even and all adjustments would occur on the other side (the top).

I did this because I determined that in a couple of strips I could open seams and make logos shorter, bringing the strip in line with its neighbours. In other cases, I made the cross framing strip wider or narrower as required. The quilt will have logos on both sides, so there will be an outside border added to bring this side of the quilt in alignment with the other side which I am sure will not measure the same!

Because I had selected a fabric where joins are not obvious, this adjustment does not jump out at you.

The top (or back) is finished!